Tag: lego

Buzz Lightyear at Hillsdale Mall

On July 23-25, members of BayLUG volunteered to help LEGO Master Builder Steve Gerling and LEGO store employees, and thousands of kids, build an 8-foot tall statue of Buzz Lightyear, from Disney’s Toy Story movies.

Buzz in Progress

The event was held at the Hillsdale Shopping Center in San Mateo, CA, near the LEGO store. Kids built 8 by 16 stud "bricks" out of 2×4 and 2×8 bricks, which were then assembled into the large model corresponding to the 2×4 bricks in a smaller sample model. BayLUG members volunteered to assist with the project, making sure there were always enough bricks for the kids to build with.

I was there on Saturday all afternoon, and came back Sunday night to help with teardown, but they had already done most of it already by the time I got there, thanks to the help of all the kids. We weren’t paid for our help, but we were given discounts on LEGO which is just as good :-)

Click the image above, or here for a slideshow.

Brick Show now open

This was the opening weekend for the the Brick Show in San Leandro, CA at the Bay Area Family Church, organized by Johannes van Galen and featuring BayLUG/BayLTC. The show is ongoing through July 25 so come on out and check it out!

The show features a large train layout and various other displays in all themes of LEGO. Admission is $5 each for adults (age 16+) and $3 for kids ages 3-15. Kids under 3 are free.

I took a bunch of pictures around the display today. Click on the image to see them:
Brick Show (June 27)
You can also view the pictures as a slide show on Flickr.

Seven-way radial symmetry technique

I just stumbled across a way to build a 7-way radial symmetry in LEGO.

7way symmetry

A technique for building 7-way radial symmetry in LEGO. The blue 2×2 plates are connected to each other using plate hinges in a ring, and when I built that I noticed the ring looked like the right diameter to go around a 4×4 round piece. The hinges actually protrude a little into the center, but by sandwiching the two 4×4 rounds together and filling the space inside with a round 2×2 plate and seven (leaving one stud open) 1×1 round plates, you can make it all fit nicely. And since the 4×4 rounds and 2×2 round plate have axle holes, it can easily be connected to any Technic mechanism.

If you stick an axle in the middle it twirls like a top – it’s very well balanced.

LDraw code after the break:

Continue reading “Seven-way radial symmetry technique”

BayLUG at Maker Faire 2010

Here are the pictures from the Bay Area LEGO Users Group & Train Club‘s exhibit at Maker Faire 2010 Bay Area in San Mateo, CA.
BayLUG at Maker Faire 2010
We had a 40′ by 50′ space just like last year, but this time we set aside about half of it as a play area for the little ones. We dumped out loose LEGO parts on the floor (including a DUPLO area for the really little ones) and spread them out on some tables as well, so that fairegoers could build whatever they wanted. We then had some tables set aside to display these MOCs (My Own Creations), and had volunteers who would take pictures of the models and put them up on a computer. I brought my video projector and we had a continuous slideshow running all weekend with pictures of these MOCs.

Besides the play area, we had the usual train layout, and a row of tables for other themes such as space and sculptures.

You can see all my BayLUG pictures from Maker Faire in the BayLUG at Maker Faire 2010 photoset (slideshow), or see Maker Faire 2010 for all my Maker Faire photos, including both LEGO and non-LEGO displays.

Bricks by the Bay Photos

My Bricks by the Bay Pictures are available on Flickr if you want to take a look at some of the great models on display and the crowds on the public day. The convention was held Friday-Sunday, April 9-11, 2010 in Fremont. We had such great media coverage that throngs of people flocked to the hotel to see the LEGO models on Sunday, April 11. People waited for hours in a line that snaked out the lobby and through the parking garage and we had to turn people away once we realized the line was so long that people at the end might not get in before closing time. It was a huge success and we’re looking forward to having an even bigger and better convention in 2012.

Grand Ballroom

Click the image to see the pictures or view them as a slideshow.

Goodbye, nnenn

I was stunned to learn today of the passing of Nate “nnenn” Nielsen in an automobile accident. Keith of the Brothers Brick has posted an excellent eulogy which I encourage you to read along with the many comments from members of the online community included in the post.

It’s relatively rare that we learn of the death of a LEGO hobbyist, but whenever it happens I always wonder what would happen to my collection of bricks after I’m gone? Estate planning is always a touchy subject, but I would encourage everyone to give it some thought, as I will be doing.

And even if you’re not a space builder, consider building a Vic Viper for the Missing Man Fly-In at BrickWorld in Chicago in June or BrickCon in October. Keith is collecting contributions for a group display honoring nnenn’s work.

http://www.brothers-brick.com/2010/04/13/farewell-to-a-legend-mourning-the-passing-of-nate-nnenn-nielsen/

I LEGO N.Y.

I LEGO N.Y. by Christoph Niemann is a book that was released on March 1, 2010. It’s a series of photographs featuring mini NYC vignettes, created entirely out of LEGO pieces! It originated as a blog post on NYTIMES.com.  As far as I know, Niemann isn’t known as an AFOL (Adult Fan of LEGO, the term used by the adult LEGO hobbyist community).

The book is a board book, printed on thick cardboard pages like a book for children who might be inclined to eat the pages.  There are photos of cute little micro-models of LEGO parts representing aspects of New York culture and life, built usually with just a handful of basic LEGO parts.  It’s certainly not a primer on advanced LEGO building techniques, but instead goes for a very minimalist approach.  Each photo has a handwritten caption saying what it is, and that’s where a lot of the humor often comes from.

There’s no sense of story or continuity; each individual item would stand alone quite well.  In fact this might have been better as a desktop calendar or comic strip format rather than a book.

I’m not a New Yorker, so perhaps I would have appreciated this more if I were.  But while I felt a lot of the little models in the book were very clever, and in some cases hilarious, a number of them just didn’t do much for me.  I think it’s enjoyable for anyone who likes LEGO, especially if you’re a New Yorker or a fan of New York, but I’m not sure it’s worth the $14.95 ($10.17 on Amazon).  I’m not sure it’s something you’d want to read over and over, which is another reason I think a desktop calendar would have been a better format for this.  Anyway, I’m donating my copy to Bricks by the Bay, to be given out as a door prize.  Maybe you’ll win it!

(Disclaimer: I was sent a free review copy of the book, and the Amazon link in this review is an affiliate link.)

BayLTC at TCA 2010

Last weekend I, along with other members of the Bay Area LEGO Train Club, had a display at the Northern California Train Collectors Association Cal-Stewart Spring Meet in Santa Clara, CA.  This is one of our favorite locations to do a train show – the hall is beautiful, and the crowds are manageable enough that we don’t have to put up our “sneeze guard” plastic barriers on the layout.  It was open to the public only on Sunday for four hours.  Pictures from the show can be seen on Flickr (or view as a slideshow).  Enjoy!

How best to share building instructions for my creations?

Every once in a while I get a request to share building instructions for my models. I am willing to do so, but haven’t quite figured out the best way. I was wondering if people might want to comment and make some suggestions?

Some possibilities for formats are are:

  • LDraw files
  • PDF of instructions generated using LDraw and LDpub
  • Printed instructions in black & white or color

The ugly side of the equation comes when I contemplate compensation.  Do I sell them or just give them away?  I think it depends on how much work I have to put into them.  I won’t go through the trouble of creating printed instructions for free, but I might be willing to share the LDraw files for free (Creative Commons licensed).  The question is, how much would people be willing to pay, and is that enough to justify the work it would take me to prepare nice looking instructions?