Set up my room at last!

I moved this past March from Mountain View, CA to El Cerrito (just north of Berkeley). In the process, I had to consolidate my bedroom and my LEGO studio into one room. That’s fine, as the new room is plenty big enough, but there was a small disaster during the move that prevented me from finishing setting up the room until just now.

You see, I keep my LEGO in these “PAX” wardrobe cabinets from IKEA. I have two of the 39 1/4″ x 23 1/2″ x 93 1/8″ wardrobes, with shelves in them that get filled up with plastic bins full of sorted LEGO parts. But because the wardrobes are so tall, the movers couldn’t fit them around the corner into my room, and so I had to disassemble them in the kitchen to be rebuilt in my room. Unfortunately, as I was taking the first one apart, I made the mistake of standing on the floor of the cabinet, which broke under my weight. I did get the other one taken apart and put back together without incident, having learned that lesson… and so, in my bedroom for the past four months, I’ve had one PAX cabinet full of LEGO, with stacks and stacks of plastic bins of parts in front of it, and the remains of the other cabinet leaning against the wall.

I finally got around to fixing the problem this week. Here’s what I did. I bought a new regular shelf from IKEA’s “as-is” department (actually 2 of them, since that’s the only way they sell them) and converted it to be a new floor. I cut pieces off the old floor shelf and used them to make brackets that the new one could sit on, and screwed/glued it all together. (Sadly, I couldn’t use the clever screws that IKEA furniture is normally held together with as that would have required precision drilling to make them fit into the new shelf/floor.) Thanks to my friend Zonker Harris for suggesting this idea, by the way. So yesterday after a few hours of mucking about with power tools and screws and glue, I managed to get the busted PAX put together, if not good as new, then at least good enough, and put all my LEGO bins away finally.

Now, it’s theoretically possible for me to start building again. I don’t know if I’ll get around to it, as I have so much work to do for Bricks by the Bay, but I’m sure I will eventually.

And speaking of Bricks by the Bay, public day tickets are now available (but you can still register for the whole convention). Hope to see you in a couple of weeks at the show!

Love, Legalized

Yesterday the Supreme Court overturned California’s Proposition 8 and the Federal Defense of Marriage Act (DOMA). I created this simple rainbow heart sculpture design to celebrate justice being done at last.
Rainbow Heart
This isn’t an opinion or politics blog, so I won’t go on any more than this, but I just wanted to share this design with the world.

BrickLink under new ownership

The online aftermarket LEGO store BrickLink has new owners! For years this online marketplace has been the best place for buying and selling LEGO parts. It was founded and developed by Daniel Jezek, a Czech-born immigrant to the US who ran the site for many years until his tragic death in 2010. The site has been owned by Dan’s parents since then, and administered ably by Eric Smith of Northstar Computer Systems. This week, the family announced that the site has been sold to the founder of an online game company based in Hong Kong, Jung-Ju “Jay” Kim, who is also a long time LEGO fan. You can read more about this on Mariann Asanuma’s post about the transaction. I wish all the best to Daniel’s family and to the new owners of the site.

Flickr Changes

Have you seen the latest stupid decision from Yahoo? They’ve not only completely redesigned the Flickr user interface, they’re phasing out the Flickr Pro account system. According to this article from Mashable, they’ve stopped selling Pro accounts, and they’ve taken away almost all the advantages that Pro account holders have had. In fact, it would seem that Pro accounts now have a smaller maximum file size than free ones (50MB vs 200MB, 90 seconds vs 3 minutes for video)!

So for those of us who have Pro accounts, the only real advantage that seems to be left is unlimited (vs. 1 TB) storage, and the ability to see view counts and referrer statistics.

Oh yeah, and they royally screwed up the UI. Sigh. Yahoo, what were you thinking?

Should I still upload my Maker Faire photos? I’m tempted to just stop using Flickr altogether… but then I have to figure out where to put my photos, and then there’s all the past posts in the blog to think about.. Ugh.

Looking forward to Maker Faire

This coming weekend, May 18-19, I’ll be joining a bunch of LEGO enthusiasts from BayLUG (Bay Area LEGO Users’ Group) at Maker Faire yet again. This annual event has been going on every year at the San Mateo Event Center (aka Fairgrounds) since 2006 and BayLUG has been a part every year. This year we have a 40′ by 40′ space which will feature robotics demonstrations, a kids’ play area, a working train layout by BayLTC (Bay Area LEGO Train Club), and lots of LEGO models on display. I hope you can come and see the show, and stop by to say hi.

Besides our LEGO exhibit, there are hundreds of amazing exhibitors and vendors offering everything from knitting to welding, from woodworking to electronics. It’s a celebration of all kinds of do-it-yourself hobbies and homebrew activities, and always lots of fun. Many of the art exhibits that you would otherwise have to go to Burning Man to see are there, and there are lots of great hands-on activiites for kids of all ages.

In the meantime, or if you can’t make it, take a look at my photos from previous years’ Maker Faires.

LEGO and My Mom

For Christmas this year, my mom got me a sweater, a necktie, a pocketknife, a toothpaste tube squeezer, and a LEGO set – LEGO Train Set #3677 Red Cargo Train. I went over to her house last night and we exchanged gifts, and she wanted to see what it looked like when it was built…. so I suggested we build it right then and there! To my surprise she wanted to do it, so I helped by sorting out the parts and going through the instruction book with her while she put the pieces on. Her 71 27 year old fingers had some trouble getting the pieces to go on, but it went pretty well.

This was, I honestly think, the first time we ever did this! I think maybe one time as a kid I tried to work with her but I didn’t have the patience and took it away to do it myself. At least, that’s the sort of kid I was :-) but we went through the first two of seven bags (the locomotive, and the high-rail truck) and she built them all herself. But after that, her fingers were sore and it was like 11pm, so we stopped and I took the rest home.

But it was really a nice little mother/son moment, even if it was 30 years late.