Tag: bus

Wheeled School Bus

Published / by Bill / 4 Comments on Wheeled School Bus

Hot on the heels of my fantastical Lunar School Bus, here’s a much more mundane version.

Wheeled School Bus

This is the first time I’ve ever encountered a need to specify “wheeled” with reference to a school bus – how about you? :-)

Anyway, it wasn’t that hard. I was thinking of doing it anyway, but when Flickr user Mad physicist asked about it I decided to give it a whirl. I pulled off the antigravity bottom and rocket engines, and otherwise left it intact. The hardest part was the nose, because it contains SNOT sub-units facing in several different directions (up, forward, down, and to both sides), plus half-stud offsets here and there to keep things interesting. However I found a way to reuse as much of the original as possible.

I was also asked if I could make instructions for it. Well, I have done that too. I made a CAD version of the lunar school bus first before I started tearing anything apart (just in case!) and then later adapted it so that you could build either school bus from the same set of sub-units. I have a master MPD file containing everything needed to build both versions, and thanks to the MPD Wizard from Orion Pobursky (see the LUGNET thread where I heard about it for details), I also have separate MPD files containing just what you need to build one or the other. I’m not sure yet how I’m going to publish it – should I charge money or just give it freely? Would people be happy with the MPD file or would they want proper directions?

Anyway, click the pic for the rest of the photos, or view a slideshow. I included some interior shots from the lunar bus in the photoset because the interior is identical.

Lunar School Bus

Published / by Bill / 5 Comments on Lunar School Bus

The other day I was thinking I’d build another hovercar, like my 2059 Cadillac or my remake of Justin’s red aircar. Lunar School Bus But as I was sifting through a bin of curved parts, the idea came to me to build a school bus when I saw some yellow Brick 2 x 4 x 1 & 1/3 with Curved Top (6081) parts.

I built it 7-wide (not counting the rocket engines), thanks to an idea I got from Flickr users Lego Monster and Mad physicist since it leaves room for an aisle; see their bus for the inspiration.

I also detailed the interior, with several students in varying degrees of good behavior and a driver inspired by the one from South Park. There are two thugs in the rear who are either conspiring or fighting, maybe both. There’s a boy facing backwards, harassing the girl in the seat behind him. And then in the front there are two reasonably well behaved kids whose hands are raised to report all this bad behavior to the driver. (Well really, their hands are raised because otherwise they wouldn’t fit in their seats)

The bus is a hovercar, using the same kind of smooth underside that I used on the Cadillac and red aircar with the ‘Wedge 4 x 4 x 2/3 Curved’ (45677) and/or ‘Wedge 4 x 6 x 2/3 Curved’ (52031) parts on the underside to represent antigravity units. I also added some 1950’s sci-fi style rocket engines for those longer hops between lunar settlements.

To see more, click the picture above or view the set on Flickr (or as a slideshow).