Bill Ward’s Brickpile

My latest building is a sushi bar. It is part vignette and part town building.

I built the interior first, starting with a bare baseplate. Only when that was completely finished, I built a basic box for walls with windows and a door in front, and a back door in the rear. The box lifts off easily; the perimeter of the baseplate is tiled, with only one stud on each side (a jumper plate) holding the walls in place.

On top of the walls there is a simple roof, with 6×8 slopes for an overhang and homemade signs, made with my trusty P-touch label maker. (The name of the restaurant is Hoshi Sushi; hoshi means “star” which is because I found that my label maker could make stars….)

The restaurant is staffed by two people: a sushi chef and a waitress. Both are rather overworked, as it is a prosperous enterprise. It was inspired by and loosely based on my favorite local sushi place, Masa’s Sushi in Mountain View, CA.

Some things to look for:

• Chopsticks made from (Minifig Feathers with Pin) stolen off the roof of my 10185 Green Grocer set. See them clearly here.
• The overpreponderance of maguro nigiri (tuna over rice) on people’s plates. This is because the only transparent color I have in 1×1 tiles that looks at all like raw fish is trans-red. I wish I had some trans-orange 1×1’s so I could have sake nigiri (salmon) but alas, no. I have some 1×2’s in trans-orange in the sushi bar waiting to be cut, however. I also have some people eating (non-trans) brown, which I decided is unagi nigiri (eel). None of the other 1×1 tile colors looked at all appetizing, and I couldn’t figure out a way to make maki (rolled) sushi at all at this scale…
• Soy sauce bottles - some are full, others are empty. (I ran out of trans-smoke cones)
• The slightly-too-big-for-minifig-scale maneki neko (beckoning cat) which sits in the back left corner (the prosperity corner, according to Feng Shui traditions) to attract money. Masa’s has a maneki neko in that spot too, but instead of a gold coin, it’s holding a bottle of Asahi beer. I guess Masa wants to invite more beer into his life :)
• See if you can guess what each minifig is thinking….

This model was at BrickFair, but I had a hard time deciding where to put it. I didn’t want to put it on the train layout, since I wanted to show it with the roof and walls removed. There was a “town, non-train” section against the far right wall, but it was full, so I put it on the nearest table to that which was the mosaic table. I also brought it to last Saturday’s BayLUG meeting. But if you missed it, I’m bringing it to BrickCon as well… hope to see you there!

To see all of the pics, click the picture above or click here for a slideshow

These two buildings, both built on 16×32 stud baseplates, have been featured in many BayLTC displays over the past couple of years. They were built in a modular fashion so that floors can be mixed and matched if desired, and taken apart for more compact storage and transport.

The blue building has a removable module for the two upper floors, and another one for the roof. The red building has one removable module, consisting of the upper floor plus roof. The Blackburn Hotel was built according to the same standards.

The trouble with this modular design though is that the architectural style of the different buildings clashes too much; they would never be combined in real life.

These buildings have now been disassembled, largely because I feel that 16×32 is just too small of a footprint for a realistic building. I am now working on new buildings using a 32×32 or larger size footprint. I brought the works-in-progress for this project to the October BayLUG meeting.

Click one of the big pictures to go to the set page on Flickr, or view a slideshow of the photos.

The Blackburn Hotel is a building that I have displayed may times as a part of the Bay Area LEGO Train Club layouts at train shows and meetings, but never blogged about.

It is one of several 16×32 footprint downtown buildings which I created for the layout one time a few years ago when I heard that several of the members who usually bring buildings to train shows weren’t going to be participating in one of the shows, and we desperately needed downtown buildings.

The building is five stories tall, built mostly using black bricks with tan trim and red windows. The unique feature of the hotel is the signs: a rooftop “BLACKBURN HOTEL” sign and a vertical sign that says “HOTEL” which is intended to be placed at a street corner, but can be rotated 45 degrees to be used for a mid-block placement.

The name was suggested by my wife. Partly it is due to the color, and partly due to the fact that I was watching an English Premier League football (soccer) match on TV as I was building it featuring Blackburn Rovers (I support any team that has American players, and Blackburn have an American goalkeeper, Brad Friedl, as well as the New Zealander Ryan Nelson who used to play in Major League Soccer).

Click the big picture to go to the set page on Flickr, or you can view a slideshow of the photos.

This little café showed off some rare printed bricks and was good at filling small spaces on the BayLTC layouts.

This simple café kiosk has an espresso machine and cash register, and two tables to enjoy your coffee at.

Click the big picture to go to the set page on Flickr, or you can view a slideshow of the photos.

This building was one of my first contributions to the BayLTC train layout, and the first one that I posted pictures of online.

This bus station has a waiting room and two lanes for buses to stop. There is also a traffic signal and cellular telephone relay tower included. Click the big picture to go to the set page on Flickr, or click on an individual photo. Or, you can view a slideshow of the photos.

Recently I posted about some little houses that I had built for the BayLTC train shows. The photos for that are on Flickr, but I wanted to also publish them on Brickshelf which I now have done.

In addition, you can find LDraw instructions for each of the three houses should you be interested in building them yourself. Here are direct links to the building instructions:

• House with Dormer
• House with Steep Roof
• Victorian House

Each one is published under a Creative Commons Attribution-Share Alike 3.0 United States License so you are basically free to do whatever you want with it as long as you give me credit. Enjoy!

I built a trio of small houses (16×16 stud footprint) as practice in building in different architectural styles with LEGO. There is a Victorian with bay window, a house with a dormer window in the roof, and a steeply-roofed house.

They’re all a bit too small to be realistic, even by LEGO standards, so I am planning to scrap them and try to build some new houses on a 32×32 footprint. Stay tuned.

View all the pics on flickr (slideshow) or just click the photo on the right.

Update 30-May-2007: Photos and LDraw instructions are now available on Brickshelf.

Technorati Tags: lego, town, architecture, house

For the past year or so, the train station on the Bay Area LEGO Train Club layouts at train shows and museums has been my San Ladrillo Suburban Train Station.

This is a modern suburban train station, with one platform and two tracks. Passengers boarding trains on the outer track wait on the main platform, and after their train arrives they cross the near track to the yellow boarding platform. Of course, this means no trains can pass through the inner track while this is happening! This is modeled after the way many stations on the Caltrain line are designed (but for safety and scheduling reasons, they are moving to a two-platform design on many of the stations).

The feature which started this model is the tile mosaic floor in the waiting area. I got the idea while riding Caltrain. When we were stopped at the Redwood City station I noticed the pattern in the concrete waiting platform of a grid of squares surrounded by long strips. Theirs wasn’t multicolored, but then theirs wasn’t built from LEGO either. :-) The station building was not based on anything from real life, though. I tried to use an archetypal station design. Note also the ticket vending machines on the station wall - tickets must be purchased before boarding!

Click the photo above to see more, or click to look on Flickr (slideshow) or on Brickshelf (pending moderation).

Technorati Tags: lego, trains, town, trainstation, sanladrillo

The TransAmerica Pyramid is one of the most distinctive structures in the city of San Francisco. In January 2006 my LEGO club, the Bay Area LEGO Users’ Group chose “mini-scale San Francisco” as the theme for our display at the LEGO store in Pleasanton, CA. I built this model, along with a scene of Lombard Street, for that display.

More pictures of the model can be found on Flickr and on Brickshelf (once moderated).

Technorati Tags: lego, pyramid, sanfrancisco, mymodels, microscale, transamerica