These buildings were made for the BayLTC train layouts. Fellow club member Kenny Paul and I agreed on a standard for the placement of Technic pegs to connect the buildings together. However, with practice it turned out to be easier to not connect them, but to just place them next to each other.
The pegs are placed in a 1×2 Technic brick with peg hole, at the 7th and 8th studs in from the street, at the 3rd and (optionally) 8th brick heights. In addition, pegs may be placed at the rear, also at the 7th and 8th studs from the edge. The backs and sides of the buildings are incomplete because they are not visible; the rule is that from street level to the 6th stud, and everything above 12 bricks in height, must be decorated.
The tan building has a removable wall on the right side. This allows it to be a corner building or to be in the middle of a series of buildings. The removable wall features a fire escape.
Migrated from my old blosxom blog, formerly at bill.wards.net/blosxom on 2026-04-24
