Bill Ward’s Brickpile

Hot on the heels of my fantastical Lunar School Bus, here’s a much more mundane version.

This is the first time I’ve ever encountered a need to specify “wheeled” with reference to a school bus - how about you? :-)

Anyway, it wasn’t that hard. I was thinking of doing it anyway, but when Flickr user Mad physicist asked about it I decided to give it a whirl. I pulled off the antigravity bottom and rocket engines, and otherwise left it intact. The hardest part was the nose, because it contains SNOT sub-units facing in several different directions (up, forward, down, and to both sides), plus half-stud offsets here and there to keep things interesting. However I found a way to reuse as much of the original as possible.

I was also asked if I could make instructions for it. Well, I have done that too. I made a CAD version of the lunar school bus first before I started tearing anything apart (just in case!) and then later adapted it so that you could build either school bus from the same set of sub-units. I have a master MPD file containing everything needed to build both versions, and thanks to the MPD Wizard from Orion Pobursky (see the LUGNET thread where I heard about it for details), I also have separate MPD files containing just what you need to build one or the other. I’m not sure yet how I’m going to publish it - should I charge money or just give it freely? Would people be happy with the MPD file or would they want proper directions?

Anyway, click the pic for the rest of the photos, or view a slideshow. I included some interior shots from the lunar bus in the photoset because the interior is identical.

My latest building is a sushi bar. It is part vignette and part town building.

I built the interior first, starting with a bare baseplate. Only when that was completely finished, I built a basic box for walls with windows and a door in front, and a back door in the rear. The box lifts off easily; the perimeter of the baseplate is tiled, with only one stud on each side (a jumper plate) holding the walls in place.

On top of the walls there is a simple roof, with 6×8 slopes for an overhang and homemade signs, made with my trusty P-touch label maker. (The name of the restaurant is Hoshi Sushi; hoshi means “star” which is because I found that my label maker could make stars….)

The restaurant is staffed by two people: a sushi chef and a waitress. Both are rather overworked, as it is a prosperous enterprise. It was inspired by and loosely based on my favorite local sushi place, Masa’s Sushi in Mountain View, CA.

Some things to look for:

• Chopsticks made from (Minifig Feathers with Pin) stolen off the roof of my 10185 Green Grocer set. See them clearly here.
• The overpreponderance of maguro nigiri (tuna over rice) on people’s plates. This is because the only transparent color I have in 1×1 tiles that looks at all like raw fish is trans-red. I wish I had some trans-orange 1×1’s so I could have sake nigiri (salmon) but alas, no. I have some 1×2’s in trans-orange in the sushi bar waiting to be cut, however. I also have some people eating (non-trans) brown, which I decided is unagi nigiri (eel). None of the other 1×1 tile colors looked at all appetizing, and I couldn’t figure out a way to make maki (rolled) sushi at all at this scale…
• Soy sauce bottles - some are full, others are empty. (I ran out of trans-smoke cones)
• The slightly-too-big-for-minifig-scale maneki neko (beckoning cat) which sits in the back left corner (the prosperity corner, according to Feng Shui traditions) to attract money. Masa’s has a maneki neko in that spot too, but instead of a gold coin, it’s holding a bottle of Asahi beer. I guess Masa wants to invite more beer into his life :)
• See if you can guess what each minifig is thinking….

This model was at BrickFair, but I had a hard time deciding where to put it. I didn’t want to put it on the train layout, since I wanted to show it with the roof and walls removed. There was a “town, non-train” section against the far right wall, but it was full, so I put it on the nearest table to that which was the mosaic table. I also brought it to last Saturday’s BayLUG meeting. But if you missed it, I’m bringing it to BrickCon as well… hope to see you there!

To see all of the pics, click the picture above or click here for a slideshow

Inspired by the NASCAR fad that’s been going around the Flickr LEGO community, I built this using the layout photo from mikepsiaki. However I thought I’d do one with the Classic Space esthetic….

The car is identical to Mike’s design, with a couple of changes:

• To get the Classic Space logo on the sides, I had to replace the 1×2 panels with 1×2 bricks. That meant the 1×1 brick with studs on two sides would no longer fit, so I substituted 1×1 Technic bricks with half-pins instead.
• Mike didn’t have anything between the rear wheels and the car body above. You could see clear through the car above the rear tires, and the car was very fragile. But the space was perfect for a 2×4 brick! Perhaps Mike uses that in his real model but just didn’t show it in the instructions layout image?
• Since this is Classic Space, I used the old style 1×1 plate with clip :)
• There’s a red Classic Space minifig inside!

Of course, I really wanted a big Classic Space logo on the hood. I have a few of the 3×6 slopes that would have fit but it would’ve ruined the lines of the car, so I elected to stick with the original parts and just put Classic Space printed bricks wherever I could fit them. I used a dark blue windscreen; I don’t think they were ever made in yellow, so this is more like the 6890 Atomic Cruiser set than the 497 Galaxy Explorer esthetic that people tend to associate with Classic Space. But that Atomic Cruiser was probably as big of an influence on me as a kid as the Galaxy Explorer anyway.

Check out the LAML Radio interview with Mike Psiaki to learn more about the NASCAR fad, or just to find out how to pronounce his last name… :)

My newest model is made from only 9 parts, but I think it’s a pretty cool thing.

It’s a lounge chair (chaise longue), as you might see at a beach or poolside setting. Perfect for a minifig resort! I’m working on a large model that includes two of these, but thought I’d post just the chairs first.

From May 31 to July 5, my Blackburn Hotel (Version 2) was on display at the LEGO Store at Valley Fair Mall in Santa Clara, CA in the BayLUG window.

This is a redesigned, bigger model of the mythical Blackburn Hotel that I originally built for the Bay Area LEGO Train Club layout. I haven’t done a proper photo-shoot of the hotel itself, but you can see pictures of it in a Flickr set I created to collect all the images of it, including the ones from this store display.

For the store display, however, I had to customize it a bit. I left off the rooftop sign, and modified the baseplates. The version that was used in BayLTC train shows used regular road plates for the street, rather than the tiled half-road (16-stud-wide baseplates) seen in the store display. Also, because the left side of the hotel was located on a street corner, the model didn’t include the road there, while on the right side there was an 8-stud half-alley. When we installed the hotel at the store, that caused the sign to be pressed against the background side wall, and the right side to have a strange gap. So, we ripped the baseplates off the bottom of the hotel and moved everything over by eight studs, putting in a partial road on the left side. Thanks to Russell and Bruce for their help reconfiguring the baseplates.

Click the big picture to go to the set page on Flickr, or you can view a slideshow of the photos.

These two buildings, both built on 16×32 stud baseplates, have been featured in many BayLTC displays over the past couple of years. They were built in a modular fashion so that floors can be mixed and matched if desired, and taken apart for more compact storage and transport.

The blue building has a removable module for the two upper floors, and another one for the roof. The red building has one removable module, consisting of the upper floor plus roof. The Blackburn Hotel was built according to the same standards.

The trouble with this modular design though is that the architectural style of the different buildings clashes too much; they would never be combined in real life.

These buildings have now been disassembled, largely because I feel that 16×32 is just too small of a footprint for a realistic building. I am now working on new buildings using a 32×32 or larger size footprint. I brought the works-in-progress for this project to the October BayLUG meeting.

Click one of the big pictures to go to the set page on Flickr, or view a slideshow of the photos.

The Blackburn Hotel is a building that I have displayed may times as a part of the Bay Area LEGO Train Club layouts at train shows and meetings, but never blogged about.

It is one of several 16×32 footprint downtown buildings which I created for the layout one time a few years ago when I heard that several of the members who usually bring buildings to train shows weren’t going to be participating in one of the shows, and we desperately needed downtown buildings.

The building is five stories tall, built mostly using black bricks with tan trim and red windows. The unique feature of the hotel is the signs: a rooftop “BLACKBURN HOTEL” sign and a vertical sign that says “HOTEL” which is intended to be placed at a street corner, but can be rotated 45 degrees to be used for a mid-block placement.

The name was suggested by my wife. Partly it is due to the color, and partly due to the fact that I was watching an English Premier League football (soccer) match on TV as I was building it featuring Blackburn Rovers (I support any team that has American players, and Blackburn have an American goalkeeper, Brad Friedl, as well as the New Zealander Ryan Nelson who used to play in Major League Soccer).

Click the big picture to go to the set page on Flickr, or you can view a slideshow of the photos.

This was built for the Ice Planet 2002 Contest on Lugnet. I didn’t win, but I thought it captured the essence of the LEGO Ice Planet 2002 theme.

Click the big picture to go to the set page on Flickr, or click on an individual photo. Or, you can view a slideshow of the photos.

Waterskiing anyone? This little boat will provide hours of aquatic fun.

Click the big picture to go to the set page on Flickr, or click on an individual photo. Or, you can view a slideshow of the photos.